FPGA VME Bridge Replacement
X-ES VME Single Board Computers (SBC) and Carrier Cards featuring the Xilinx Artix-7 VME Bridge
X-ES is committed to VME and the many systems that rely upon its proven technology. With their cutting-edge FPGA-based VME Bridge, X-ES is able to offer more features and functionality than had ever previously been available with a traditional VME Bridge. Their Intel® and NXP 6U VME SBCs come standard with high-performance processing capabilities, a wide variety of I/O support including Ethernet, USB, and serial, and are backed by their top-tier team of engineers and local support offered by Metromatics.
The XCalibur1931 is a high-performance, 6U VME SBC that was designed to be pin-compatible with the Radstone/GE/Abaco PPC7D VME card, providing users with a straightforward, disruption-free upgrade path for legacy systems.
The NXP QorIQ T2080 processor coupled with up to 8 GB of DRAM, up to 32 GB NAND flash, and two PMC/XMC sites provides a significant performance boost over the PowerPC 7447.
The XCalibur1931 supports six Gigabit Ethernet ports, PMC I/O, and RS-232/422/485 serial ports out the P2 backplane connectors. The front panel supports two Gigabit Ethernet ports, RS-232 serial, and an optional USB 2.0 port.
Contact Metromatics now for further information or pricing on the X-ES XCalibur1931
The XCalibur4531 is a 5th Generation Intel® Core™ i7 6U VME SBC featuring a Xilinx Artix-7 FPGA-based VME bridging solution.
By implementing an FPGA-based VME bridge, the XCalibur4531 mitigates obsolescence concerns prevalent in aging VME systems. XCalibur4531 supports VME32, VME64x, and 2eSST operation for easy integration into existing VME systems, making it the optimal choice to give your application a processing performance boost.
XCalibur4531 supports up to 16 GB ECC SDRAM, 64 GB onboard SSD storage, and hosts two XMC or PMC modules. XCalibur4531 is available in both air- and conduction-cooled assemblies with standard I/O interfaces including serial, video, USB, Ethernet, and SATA.
Contact Metromatics now for further information or pricing on the X-ES XCalibur4531
The XCalibur1930 is a high-performance, 6U VME, multiprocessing, single board computer featuring an NXP QorIQ T2080 processor with four dual-threaded e6500 cores running at up to 1.8 GHz, each with a 128-bit AltiVec SIMD unit.
The XCalibur1930 provides up to 8 GB of DDR3-1866 ECC SDRAM, two XMC/PrPMC slots, and 512 MB of NOR flash (with redundancy). It also supports Gigabit Ethernet, PMC I/O, USB, SATA, and RS-232/422/485 serial ports out the P2 backplane connectors. The front panel supports 10 Gigabit Ethernet, Gigabit Ethernet, USB, and RS-232 serial ports.
Contact Metromatics now for further information or pricing on the X-ES XCalibur1930
The XChange4003 is a VME64x carrier card that facilitates connectivity of PMC/XMC modules to the VMEBus, by utilising a Xilinx Artix-7 FPGA-based VME bridging solution. The FPGA-based VME bridge solution assures long production life and high performance operation.
XChange4003 supports all deployed versions of the VMEBus protocol, from the original VME32 up through VME64x and 2eVME/2eSST operation, making it an effective solution for interfacing any XMC/PMC module to any system’s VMEBus backplane.
XChange4003 supports both intelligent (Monarch PrPMC/Root Complex PrXMC) and non-intelligent (PMC/endpoint XMC) boards, and can operate in a SYSCON or non-SYSCON VMEBus slot.Contact Metromatics now for further information or pricing on the X-ES XChange4003 Carrier Card
For further information on our range of high performance FPGA Processing Modules in Xilinx, NXP, Spartan or Virtex Series formats, please click here.